What it is: Apply skincare products in an ultra-fine mist for flawless application and improved skin absorption with Breeze Stylus Head. Protect your skin on-the-go with the single-use, SPF 30 setting powder to help to absorb excess oil and deliver powerful protection against sun damage.

What is included:

• Breeze Airbrush Skincare Stylus Head
• Anti-Aging 2-bottle Skincare Regimen Kit
  • Hyaluronic 2% Serum in Mist: Primer to Hydrate and Nourish Skin
  • Niacinamide 10% Serum in Mist: Blemish Fighter and Skin Brightener

• SPF 30 Setting Powder - 18 pack

What is does: The skincare mist is then precisely propelled directly onto your skin where the active ingredients can be absorbed and deliver results. Then protect your flawless skin with on-the-go SPF 30 suncreen setting powder. 

Why You'll love it: Unique delivery system using Breeze Airbrush stylus head allows for these formulas to be absorbed effectively into the skin, offering proven results. Control oil and protect your skin with SPF 30 in a convenient, on-the-go package!

Hyaluronic 2% Serum in Mist

Water (Aqua), Pentylene Glycol, Glycerin, 1,2-Hexanediol, Sodium Hyaluronate, Allantoin, Panthenol, Citrus Medica Limonum (Lemon) Fruit Extract, Hydroxyacetophenone 

Niacinamide 10% Serum in Mist

Water (Aqua), Niacinamide, Propanediol, Glycerin, 1,2-Hexanediol, Zinc PCA, Salicylic Acid, Citrus Medica Limonum (Lemon) Fruit Extract, Melia Azadirachta Leaf Extract, Melia, Azadirachta Flower Extract, Corallina Officinalis Extract, Coccinia Indica Fruit Extract, Aloe Barbadensis Flower Extract, Ocimum Basilicum (Basil) Flower/Leaf Extract, Curcuma Longa (Turmeric) Root Extract, Ocimum Sanctum Leaf Extract, Solanum Melongena (Eggplant) Fruit Extract, Amylopectin, Dextrin, Polydextrose, Hydroxyacetophenone

SPF 30 Setting Powder

Active Ingredients: Zinc Oxide 25% Titanium Dioxide 8%

Inactive Ingredients: Silica, Magnesium Myristate, Mica, Boron Nitride, Bismuth Oxychloride, Water (Aqua), Chlorphenesin, Jojoba Esters, Theobroma Cacao (Cocoa) Seed Butter, Tocopheryl Acetate | May Contain (+/-): Titanium Dioxide (CI 77891), Iron Oxides (CI 77941, 77949, 77942), Ultramarines (CI 77007)

Unlike traditional skincare application, with Airbrush Skincare and the LUMINESS Active concentration formulas - a little goes a long way.

• Start by adding just a few drops of your chosen skincare into the product well at the top of the device and close the lid.
• Close your eyes and feel the air coming out of your BREEZE which will guide your application.
• Gently pull back on the device trigger to release the serum in mists onto the skin while moving in a circular motion.
• Once you’ve completed your application, simply add a few drops of water into the product well, and pull back fully on the trigger to clean your device.

Hyaluronic 2% Serum in Mist

• Directions: Dispense 6 drops into Breeze Airbrush System product well. Pull back trigger to the soft spray setting to dispense mist. Apply an even layer on to skin.
• Usage Frequency: Can be used twice daily, morning and night.

Retinol 1% Serum in Mist

• Directions: Use as part of a daytime routine. Dispense 5 drops into the Breeze Airbrush System product well. Pull back trigger to the soft spray setting to dispense mist. Apply an even layer on to cleansed skin. Use SPF during the use of this product for added protection.
• Usage Frequency: Use at night 3-4x weekly or as tolerated by skin.

Battery Charging - ENSURE DEVICE IS FULLY CHARGED FOR 4 HOURS BEFORE USE FOR OPTIMAL PERFORMANCE.

• To charge, connect charging cable into a USB charging box.
• Remove silicone stopper from charging port and connect charging cable onto USB charging port on base of device.
• Power button light will blink during charging.
• When indicator light stops blinking and turns on, the system has been fully charged.
• Device battery indicator light will flash red when the batter power has been depleted.

Multi-Speed Setting

• 1- Speed: Press ON/OFF button once to turn device on and activate first speed
• LED light will illuminate solid
• 2-Speed*: Press ON/OFF button twice to turn device to activate two speed
• Both LED lights will illuminate solid
• Clean mode*: Press and hold the ON/OFF button until LED lights turn on or for about 5 seconds
• All LED lights will illuminate and blink

*Available in select models

How to Clean 

• Place eight (8) drops of water or Cleaning Solution into product well. The solution will loosen and dissolve left over makeup or skincare. If you don’t have Cleaning Solution run warm to hot water through your system stylus after each use.
• Activate clean mode* by pressing and holding power button until LED lights turn on for about 5 seconds. Place index finger over airbrush nozzle to block airflow. Gently pull back on airbrush trigger up to the heavy setting so small bubbles appear in product well. Back bubble for 8-15 seconds depending on level of cleaning needed. Back bubbling aerates and clears airbrush makeup or skincare inside the stylus.
• Pull back trigger to heavy setting to flush out product onto a tissue or into a bathroom sink.
• Remove any makeup or skincare from product well with a soft cotton swab. Do not apply excessive pressure to airbrush needle running through bottom of makeup well as this may damage your airbrush stylus.

TIP: To Prevent Clogs & Splattering

• Fill product well half way with Tip Top Cleaning Solution
• Let sit overnight
• Spray out completely before next use

Breeze Airbrush Care